When your driveway has already begun to crack, form potholes, or even lose its color, you are likely to think that it is time to change its surface — or perhaps it is possible to repair it with a resurfacing. One of the clever and economical ways to give a new life to your old and worn driveway and not go bankrupt in the process is asphalt driveway resurfacing.
The asphalt surfaces are beaten in areas such as Dandenong and throughout Melbourne, where the weather keeps changing to be either hot or wet. But the good news? You do not necessarily have to begin all over again. Resurfacing may be the best thing to do — and it will give your driveway an appearance of being new again.
We can deconstruct why and when you should think about the resurfacing of your asphalt driveways and how such a practice can solve some of the most prevalent driveway problems that we encounter in Melbourne.
The asphalt driveway resurfacing entails the application of a hot mix asphalt over the current driveway surface. Consider it a makeover and not a rebuild. Rather than shredding it all and beginning anew, we apply a new layer of top that flattens the flaws, seals cracks, and gives it back its strength.
It is an incredibly efficient procedure capable of extending the life of your driveway by several years, yet at no cost that would be as high as the cost of the entire replacement.
Not all cracks or discolours will require a complete driveway replacement. Actually, it is true that most of the Dandenong homeowners have an opportunity to increase the life of their driveways by choosing resurfacing instead.
The following are some of the indicators that it may be time to resurface:
When your driveway starts to form a small crack or shallow potholes, then it is an indication that it is wearing off at the surface. They may readily deteriorate with the change of temperature and rain in case they are not treated. Repairs are done by resurfacing them to protect them.
As time passes, the asphalt changes into a clear gray in place of a deep black because of the exposure to the UV rays. This fading is not merely cosmetic, but this implies that the surface is brittle. A fresh coat of asphalt can also give back that dark, smooth look and enhance longevity.
When there is rain and there is water on your driveway, it might be because of dips or depressions. The resurfacing will enable the surface to be even, and thus there will be no accumulation of water or damage in the future.
Complete replacement is done through tearing the old surface, regrading the base, and laying new asphalt: an expensive and time-consuming procedure. On the other hand, resurfacing provides you with the same results at a fraction of the time and a fraction of the cost.
This is why resurfacing can be a good idea in the case of the Dandenong homeowners:
Complete replacements are twice as costly as resurfacing. In case your foundation is in good condition, resurfacing provides a strong new top level at a small fraction of the price.
You will not have to wait weeks to use your driveway once more. Through most of the resurfacing projects, it takes a few days, with the weather and area size, to have your project completed.
Resurfacing makes use of a lot of your current driveway foundation. That is less wastage, fewer materials, and a reduced environmental imprint, something that each homeowner in Melbourne can be proud of.
The new top layer is not only attractive, but it also some sort of seals and enhances the surface underneath it. You are really putting a new turn on your driveway.
The weather is unpredictable in Melbourne and may be harsh on driveways. From hot summers to rainy winters, the swelling and shrinking of the asphalt are destructive in the long run. We will consider some of the common problems and their solution by resurfacing.
Dandenong's climate is characterized by hot and cold rain. Such changes make asphalt swell and shrink, creating cracks. Solution: Resurfacing seals the cracks in place and forms a flexible and durable top surface, which is resistant to temperature stress.
The seepage of water into asphalt erodes it at the base. This results in soft spots and potholes. Solution: Resurface driveway remedies shallow drainage problems and avoids water infiltration using a smooth and new top layer.
With time, as the sun decays the asphalt binder, the surface becomes brittle and pale. Solution: Resurfacing will resurface the rich black finish and the protective layer that will protect your driveway against UV rays.
In case you have a sound foundation to your driveway, resurfacing is a great solution to surface degradation without necessarily constructing the surface down to the ground.
This is what normally occurs in a driveway resurfacing project on asphalt:
Your driveway is checked by experts who inspect the driveway to note the presence of deep cracks or base damage. Minor repair is done before the commencement of resurfacing.
Every scrap, dust, and grass is cleared to allow the new asphalt to be laid.
To assist in the attachment of the new layer of asphalt, a tack coat (sticky bonding layer) is used to aid the adhesion of the new asphalt layer to the old one.
A new layer of hot mix asphalt of 25-50mm thickness is smooth and compacted with the help of rollers.
The surface is flattened, polished, and enclosed in order to form a smooth and durable surface. Your driveway will be in use once again after a brief curing.
Depending on the size, condition, and quality of the material, the cost is different; however, generally, resurfacing is much cheaper than total replacement. It is an investment that makes you save time, money and future headaches.
Consider it in the following manner: a little today in resurfacing can save you a lot of money in the future in total reconstruction.
In case your driveway is old, cracked, or faded, yet the foundation is still good, the ideal solution is asphalt driveway resurfacing. It is a cost-effective, green, and will increase the immediate value of your property.
There is no need to change your whole driveway; rather than give it a clean start by resurfacing it. It is also among the most effective methods of securing your investment and ensuring that your property is in its finest form in the years to come.
When you are at Dandenong or any part of Melbourne and your driveway is beginning to show signs of wear, do not wait until the tiny cracks become huge issues. Contact MR Asphalt today and get quality advice and recommendations on how to resurface your property. Get your driveway inspected today and have your surface resurfaced to look like a brand new asphalt surface!
Contact MR Asphalt Today
